What are standard cabinet sizes?

Base cabinet dimensions. Standard base cabinet depth is 24 inches (61cm). Deeper cabinets are also available and are useful because refrigerators have been getting deeper – up to 36 inches deep (92cm) so a deeper countertop is appropriate.

How deep is the average kitchen counter?

25 inches

What is the standard height for countertops?

Yes, standard kitchen counters are 36″ off the floor, but depending on countertop thickness and standard cabinet heights, this overall height can vary from 35 1/2″ to 37″ Bar height is 39″- 42″, as shown on the bar in this picture.

How big is a sink base cabinet?

Size. The interior width of the sink’s cabinet determines the maximum dimensions for your sink. Most base cabinets are 36 to 42 inches high and 25-1/4 to 26 inches wide. A typical 33-by-22-inch sink will fill a 36-inch base cabinet.

How big is a kitchen island?

36 inches is a recommended standard height. Seating at a 36-inch-high island is somewhere between a typical kitchen table seat and typical bar stools. Some professionals recommend 42 inches for an island that will be used mainly for seating/eating.

How tall is a standard refrigerator?

The typical side-by-side refrigerator measures between 30 and 36 inches in width, 67 and 70 inches in height and from 29 to 35 inches in depth. Total volume ranges from 22.5 to 31 cubic feet, with 14.5 to 20 cubic feet in the refrigerator portion.

What is the standard size of a kitchen countertop?

A linear foot is 12 inches wide and 25 inches deep because the standard depth of kitchen countertops is 25 inches.

What is the standard height of a bar top?

Answer: The most common height for a bar top, whether it is a kitchen breakfast bar, a basement wet bar, or your commercial bar down at the corner pub is 42-inches. Standard conventions support the 42-inch bar height. Most premade back splashes are 4 to 6-inches tall.

What is the depth of a counter?

Counter Depth: The standard is 24″. But again, this can vary based on your size, appliance depths, and details of the backsplash and cabinetry. Upper Cabinet/Shelving Clearance: The distance from the countertop to the upper cabinets or shelves should be 15 – 20″.

How tall is a standard base cabinet?

Typically, standard base cabinets measure 34.5″ H and 36″ H from the floor to the top of the countertop when a countertop is installed. The toe kick portion of the cabinet is 4.5″ H, the standard door height is 24″ H and the top drawer height is 6″ H (equaling 34.5″ H total).

How do you measure for kitchen cabinets?

Measure Your Kitchen

  • Ensure accuracy. You’ll need a tape measure, straight edge and graph paper.
  • Measure clockwise. Record the overall length of each wall, working to your right around the room.
  • Get the width and height. Take horizontal measurements of walls at 36-inch height.
  • Find your center.
  • Include the trim.
  • What is the normal height for upper kitchen cabinets?

    The reason for this is that 18 inches of clearance between base cabinets and uppers are regarded as the optimal working space, and with base cabinets generally 36 inches high (with countertop included) and 24 inches deep, upper cabinets beginning at 54 inches provides the desired 18-inch clearance.

    How deep is a stove?

    The most common stove width is 30 inches, and most stoves are 36 inches high so they are flush with the standard kitchen counter height. The standard stove depth is 25 inches, but oven door handles often add a few inches.

    How do you measure for countertops?

    = Total Square Feet: Measure each countertop section and record the length and depth dimensions of the sections (in inches, rounded to the nearest inch). Add all the sections (1-8) together to calculate the total square inches. Divide the total square inches by 144 to get the total square feet.

    How deep is a standard upper kitchen cabinet?

    Most of my clients are gravitating toward upper cabinets that are 14 to 16 inches deep, roomy enough to accommodate their chargers and other oversize dishes. (The dimensions of lower cabinets, typically 24 inches deep and 36 inches tall, still work.)

    How high is a toe kick?

    The optimal height for a toe kick is 3 1/2 inches, and heights up to 4 inches are common. Increasing the height over 3 1/2 inches does not hurt the effectiveness of the toe kick, but it may very slightly reduce the space in your base cabinet. Heights less than 3 1/2 inches can cause some people problems.

    How tall are standard upper cabinets?

    The standard height of an overhead cabinet is 30 inches, but 36-inch or 42-inch tall cabinets are available to allow you to extend the cabinets to the ceiling to maximize storage space. Upper cabinet widths are sized in 3-inch increments from 9 to 48 inches.

    What is the standard height of a kitchen cabinet?

    Measure the height of the base cabinets. Most standard cabinets are 34-1/2” high. Add 1-1/2” for a standard countertop and 18 inches for a standard backsplash, (though some designers now want a 20-inch backsplash to make room for small appliances).

    What is a toe kick?

    A toe kick is the area between the base cabinet and the floor. It is also referred to as the toe space. A toe kick is the recessed area at the bottom of a base cabinet. Toe kicks are built into bathroom vanities and kitchen cabinets to allow homeowners to be more comfortable as they are working on the counter-top.

    How high is a bathroom vanity?

    Then measure sizes for vanity cabinets and vanity cabinets with tops. Take into account your storage needs and who will use it. Standard countertop height is 31 inches, but it’s really a matter of personal preference. Taller adults might want a higher countertop, while shorter models work better for small children.

    Leave a Comment