What color tube is used for a ESR?

LAVENDER. CBC, ESR, HgbA1C, Blood Bank (must have within 24 hrs), CF (need form), ESR (must have within 12hrs)

In this way, what color tube is used for vancomycin trough?

The use of gel-barrier tubes is not recommended due to slow absorption of the drug by the gel. Depending on the specimen volume and storage time, the decrease in drug level due to absorption may be clinically significant. Red-top tube , lavender-top (K2- or K3- EDTA) tube, or green-top (heparin) tube.

When should vancomycin trough be drawn?

Other instructions are as follows:

  • Do not draw specimens until steady state is achieved (ie, before fourth dose)
  • Draw trough specimen immediately before (≤30 min) next dose.
  • Draw peak specimen 1-2 hours after completion of intravenous dosage.
  • What is a trough level?

    In medicine and pharmacology, a trough level or trough concentration is the lowest concentration reached by a drug before the next dose is administered, often used in therapeutic drug monitoring. It helps in therapeutic drug monitoring.

    What color tube used for glucose?

    GRAY. Sterile blood collection tubes for laboratory procedures requiring plasma or whole blood chemistry procedures where glycolytic inhibition of specimen is required. The anti-glycolytic properties prevent the blood cells from using the glucose in the sample.

    What color tube do you use to draw a CBC?

    Lavender-Top Tube – EDTA: EDTA is the anticoagulant used for most hematology procedures. Its primary use is for the CBC and individual components of the CBC. The larger (6ml) tube is used for blood bank procedures.

    What color tube top has no additives?

    A review of blood collection tube stopper colors, additives, and usage.QuestionAnswerRed additive?Glass tube has no additive; plastic tube has a clot activator.”Tiger Top”/Red and Black Mottled OR Gold additive?Silicone (“gel system”)Lavender additive?EDTA (anticoagulant)

    What color tube is used for prothrombin time?

    Light Blue-Top Tube (Sodium Citrate): This tube contains sodium citrate as an anticoagulant and is used for drawing blood for coagulation studies. Note: It is imperative that the tube be completely filled. The ratio of blood to anticoagulant is critical for valid prothrombin time results.

    What color tubes are used for which tests in phlebotomy?

    Phlebotomy Order of Draw-Tube Color and Dept.

  • Yellow. Microbiology – SPS – Blood Cultures – Invert 8-10 times.
  • Light Blue. Coagulation – NaC – Platelet Function, Routine Coagulation – Invert 3-4 times.
  • Red.
  • Gold, Tiger Top, Red/Yellow/Black.
  • Green, Light Green, Green/Gray.
  • Purple/Lavender.
  • Pink.
  • Gray.
  • What color tube is used for a TSH test?

    THYROID STIMULATING HORMONESPECIMEN COLLECTIONTest code:TSHSpecimen type:Plasma or serumPreferred collection container:Stat/Line draws: 3 mL light-green-top (plasma separator) tube Routine requests/off-site specimens: 3.5 mL gold-top (serum separator) tube

    What color tube is used for a magnesium?

    Minimum Blood Amounts RequiredTESTCOLOR OF TUBEBMP CMP Osmolality, Blood Magnesium, Blood Amylase, Blood Liver Panel Calcium, Total, Blood Phosphorus, Inorganic, Bloodone small red or green one small red or greenCreatine Kinase – MB LD Isoenzyme Panelone small redDigoxinone small redDilantinone small red

    What color tube is used for troponin?

    0.5 mL. Alternative Specimen(s) Plasma collected in: Sodium heparin (green-top) tube, lithium heparin (green-top) tube, or EDTA (lavender-top) tube. Collection Instructions.

    What color tube do you use for a BNP?

    The blood must be collected in a plastic lavender-top tube (EDTA). BNP is not stable in serum. The specimen should be centrifuged and the plasma separated into a plastic tube within one hour after collection. Freeze separated plasma immediately.

    What color tube is used for ESR?

    PURPLE. LAVENDER. The interior of the tube wall is coated with either EDTA K2 or EDTA K3. The tube is also available with an 8% liquid EDTA solution.

    What color tube is used for blood culture?

    Please, JUST DO IT. The sequence of collection of evacuated tubes in a multi-draw should be in this order: Sterile/Blood cultures (yellow stopper or bottles, most institutions use bottles)

    What is a lavender top tube used for?

    Light green or green/gray “tiger”: For plasma determinations. Purple or lavender: K2 EDTA. This is a strong anticoagulant and these tubes are usually used for complete blood counts (CBC). Lavender top tubes are generally used when whole blood is needed for analysis.

    What color tube is used for rheumatoid factor?

    Serum separator tube or plasma separator tube. Also acceptable: Green (sodium or lithium heparin), lavender (EDTA), or pink (K2EDTA). Body Fluid (refer to Rheumatoid Factor, Body Fluid, ARUP test code 2003347). Hemolyzed specimens.

    What color tube is used for TIBC?

    The TIBC and Percent Saturation reference intervals will not change. SPECIMEN REQUIREMENTS: Draw blood in a plain, red-top tube(s) or a serum gel tube(s) from a fasting patient (12 hour) before 12 noon.

    What color tube is used for hba1c?

    HEMOGLOBIN A1CSPECIMEN COLLECTIONTest code:HBA1CSpecimen type:Whole bloodPreferred collection container:4 mL lavender-top (EDTA) tube 2 mL lavender-top ( EDTA) tube

    What color top tube is used for serum?

    Royal blue top tube (no preservative) with clot activator: used for trace metal serum determinations. Green top tube with sodium or lithium heparin: used for plasma or whole blood determinations.

    What color tube is used for an electrolyte test?

    PHCC Phlebotomy (Lab tests and departments)QuestionAnswerWhat color tube(s) is used for a CMP?Green PST / SST / Plain RedWhat color tube(s) is used for a Retic count?LavenderWhat color tube(s) is used for PTT?Blue TopWhat color tube(s) is used for Electrolytes?Grenn PST / SST / Plain Red

    Leave a Comment