What is a closet collar?

In plumbing, a closet flange (also known as a toilet flange) is a pipe fitting (specifically, a type of flange) that both mounts a toilet to the floor and connects the toilet drain to a drain pipe. The name comes from the term “water closet”, the traditional name for a toilet.

How long does it take for caulk to dry in a shower?

While some caulks may dry to the touch quickly, according to CaulkYourHome.com, silicone caulk takes approximately 24 hours to fully cure; humidity levels in the home can slow or speed curing times. CaulkYourHome.com recommends waiting at least 3 to 12 hours before exposing the fresh caulk to water.

Can you replace just the back of a toilet?

If your toilet tank is cracked, there is no way to repair the damage, so it must be replaced. Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank.

How high can a toilet flange be above the floor?

First things to be careful of is proper flange height. With the toilet removed you can see the toilet flange and measure its height above the floor. Optimum flange height to aim for is 1/4 inch above the finished floor. This allows for basically any type of wax to be used and still get a great seal.

What is a closet bend used for?

The closet bend is a primary part of the commode drainage system. Its name relates to “water closet,” a term used by plumbers to mean the commode. A closet bend is a 90-degree elbow fitting, but it doesn’t form a sharp angle.

How much is a wax ring?

The brand, size and quality of a toilet wax ring can affect the price. On average, toilet wax rings cost between $4 and $5; however, some brands can cost as much as $35 on the high end. Homeowners who need a wax ring extender to make the seal fit with the flange can expect to spend $5 to $10 more for this part.

What is a PEX?

Almost all PEX used for pipe and tubing is made from high-density polyethylene (HDPE). PEX contains cross-linked bonds in the polymer structure, changing the thermoplastic to a thermoset. Cross-linking is accomplished during or after the extrusion of the tubing.

How big is a toilet flange?

The ring has slots for the bolts that hold the toilet down. The flange pipe can have a diameter of either 3 or 4 inches, depending on the size of the waste line, but a 4-inch hole works in both cases.

How far does a toilet have to be away from a wall?

Standard drywall is 1/2 inch thick, so the plumber should set the toilet flange at least 15-1/2 inches from the center of the flange to the wall framing. The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing.

What is the minimum distance from toilet to wall?

Recommended: Plan a clear floor space of at least 30 inches from the front edge of all fixtures (lavatory, toilet, bidet, tub, and shower) to any opposite bath fixture, wall, or obstacle. Code Requirement: A minimum space of 21 inches must be planned in front of lavatory, toilet, bidet, and tub.

How much space should you leave around a toilet?

Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.

What is a 10 inch rough in toilet?

Toilet rough in measuring: from wall to bolt cap. When talking toilets, the toilet rough in is the distance from the wall behind the toilet to the center of the outlet pipe where the waste leaves the toilet. The most common distance is 12 inches, so most toilets have a “12-inch rough.”

What is the rough in for a toilet?

To find out your toilet’s rough-in, measure from the wall behind the toilet to the middle of the closet bolts, which hold your toilet to the floor. That distance will likely be a bit more than the standard 10″, 12″, or 14″ rough-in dimensions. Round your measurement down to the nearest standard rough-in.

How long is a standard toilet?

Total height of one piece gravity toilet might vary from 21 to 30 3/4 inches (53 – 78 centimeters) with 14” – 16” (356 – 406 mm.) distance from the floor to bowl rim. Depth usually stays within 27” – 30” (686 – 762 mm) and width very rarely exceed 20 in (508 mm).

What is the average height of a toilet?

Seat Height. Unlike standard bowls, whose rim stands about 14 or 15 inches above the floor, most “comfort height” toilets are 17 to 19 inches high. Some people find them more comfortable to use, as the added height makes it easier to get on and off the throne.

Are all toilets a standard size?

The standard distance is 12 inches, but 10 or 14 inches are occasionally found in older homes. Determine the rough-in in your bathroom by measuring from the wall behind the toilet to the middle of the bolts on the base, and compare to your desired toilet’s dimensions.

Which toilet has the best flush?

Best Flushing Toilet 2018: Editor’s Top Pick

  • WoodBridge T-0001, Dual Flush Elongated One Piece Toilet.
  • KOHLER 3810-0 Santa Rosa Comfort Height Elongated 1.28 GPF Toilet.
  • Dometic 320 Series Standard Height Toilet w/Hand Spray, Bone.
  • TOTO MS604114CEFG#01 Ultramax II Het Double Cyclone Elongated One Piece Toilet.
  • Are toilet seats a standard size?

    For your reference, the standard measurement for US toilet seat bolts is 5.5 inches. Measure the width of the bowl at its widest point. If you have a round bowl, this dimension should be about 16.5 inches. If you have an elongated bowl, the measurement should be around 18 to 18.5 inches.

    Do all toilet seats fit any toilet?

    There are industry standards for toilet seats – all toilets have seat post holes on 5 1/2″ centers – all elongated bowls are 18 1/2″ from seat posts to front of rim, and all round bowls are 16 1/2″. Any manufacturer’s seats will fit any toilet manufacturers bowls if they are standard round or standard elongated.

    How do you know if you have a round or elongated toilet?

    it’s a noticeable difference. If you’re still wondering, you can measure from the two mounting bolts at the seat hinge to the very front of the toilet bowl. That measurement will be about 16 1/2 inches if the bowl is round, and 18 1/2 inches if your bowl is elongated.

    Which is better round or elongated toilet?

    Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.

    What is an elongated toilet seat?

    An elongated bowl is approx. two inches longer than a round bowl. This results in a larger target area and less drip on the bowl, thus improving sanitary conditions. SIZE is important when you’re buying a flip toilet potty seat.

    Leave a Comment